unisa ITA  unisa ENG


Alessandro Naddeo

Pubblicazioni

2015

Baldino, L.; Naddeo, F.; Cardea, S; Naddeo, A.; Reverchon, E.(2015). FEM modeling of the reinforcement mechanism of Hydroxyapatite in PLLA scaffolds produced by supercritical drying, for Tissue Engineering applications. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Vol. 51. Pag.225-236 ISSN:1751-6161.
ID:78930 Articolo in rivista (262)
Versione online
Naddeo, Alessandro(2015). Optimization and solution approximation of design problems formulated by axiomatic design and paracomplete logic. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH. Vol. 10. Pag.38058-38064 ISSN:0973-4562.
ID:83847 Articolo in rivista (262)
Versione online
Naddeo, Alessandro(2015). Axiomatic design of a car bonnet: A new decoupling method based on fuzzy logic application. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH. Vol. 10. Pag.23859-23870 ISSN:0973-4562.
ID:83846 Articolo in rivista (262)
Versione online
Vallone, M.; Naddeo, A; Cappetti, N.; Califano, R.(2015). Comfort driven redesign methods: An application to mattresses production systems. THE OPEN MECHANICAL ENGINEERING JOURNAL. Vol. 9. Pag.492-507 ISSN:1874-155X.
ID:85716 Articolo in rivista (262)
Versione online
Naddeo, Alessandro; Cappetti, Nicola; Califano, Rosaria; Vallone, Mariarosaria(2015). The Role of Expectation in Comfort Perception: The Mattresses’ Evaluation Experience. PROCEDIA MANUFACTURING. Vol. 3. Pag.4784-4791 ISSN:2351-9789.
ID:85717 Articolo in rivista (262)
Versione online
Cappetti, N.; Naddeo, A.; Naddeo, F; Solitro, G.F.(2015). Finite elements/Taguchi method based procedure for the identification of the geometrical parameters significantly affecting the biomechanical behavior of a lumbar disc. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING. Pag.1-8 ISSN:1025-5842.
ID:83848 Articolo in rivista (262)
Versione online
Alessandro Naddeo, Marco Apicella, Davide Galluzzi(2015). Comfort-Driven Design of Car Interiors: A Method to Trace Iso-Comfort Surfaces for Positioning the Dashboard Commands. In: Technical Paper of SAE 2015 World Congress & Exhibition Detroit (USA) 20-24 of April 2015 SAE International Vol.unico, Pag.--- ISBN:9780768077186
ID:68081 Contributo in Atti di convegno (273)
Naddeo, A.; Cappetti, N.; D'Oria, C.(2015). Proposal of a new quantitative method for postural comfort evaluation. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS. Vol. 48. Pag.25-35 ISSN:0169-8141.
ID:68111 Articolo in rivista (262)
Naddeo A., Vallone M., Fasulo L.(2015). ERGONOMIC ANALYSIS AND COMFORT DRIVEN REDESIGN OF STUDENT CLASSROOM COMBO DESKS AT UNIVERSITY OF SALERNO-ITALY. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 10. Pag.87-98 ISSN:1843-3766.
ID:68113 Articolo in rivista (262)

2014

Alessandro Naddeo(2014). Axiomatic Design of a car bonnet: a new decoupling method based on Fuzzy Logic application. In: Proceedings of Asia-Pacific Materials Science and Information Technology Conference (APMSIT 2014) Shangai 13-14 December 2014 Shangai Engineering and Industry Technology Institute Vol.unico, Pag.1-8
ID:62117 Contributo in Atti di convegno (273)
Salvatore, Barba; Fausta, Fiorillo; Alessandro, Naddeo; Davide, Barbato(2014). Tecniche di image editing: un possibile “work flow” per le AP. In AA.VV. Prospettive architettoniche: conservazione digitale, divulgazione e studio Pag.871-886 Roma, Sapienza Università Editrice.
ID:77582 Contributo in volume (Capitolo o Saggio) (268)
Alessandro Naddeo; Nicola Cappetti; Mariarosaria Vallone; Rosaria Califano(2014). New trend line of research about comfort evaluation: proposal of a framework for weighing and evaluating contributes coming from cognitive, postural and physiologic comfort perceptions. In: Advances in Social and Organizational Factors Cracovia (PL) 19-23 July 2014 Delft Peter Vink Vol.unico, Pag.503-515 ISBN:9781495121029
ID:62118 Contributo in Atti di convegno (273)
Alessandro Naddeo;Nicola Cappetti;Orlando Ippolito(2014). Dashboard Reachability and Usability Tests: A Cheap and Effective Method for Drivers' Comfort Rating. In: Dashboard Reachability and Usability Tests: A Cheap and Effective Method for Drivers' Comfort Rating Detroit, MI; United States 8 April 2014 through 10 April 2014 Detroit SAE INTERNATIONAL Vol.unico, Pag.1-9
ID:62116 Contributo in Atti di convegno (273)
Alessandro Naddeo; Francesco Naddeo; Nicola Cappetti(2014). Automatic versatile parametric procedure for a complete FEM structural analysis of composites having cylinder-shaped reinforcing fibres. COMPUTATIONAL MATERIALS SCIENCE. Vol. 81. Pag.239-245 ISSN:0927-0256.
ID:57865 Articolo in rivista (262)

2013

Alessandro Naddeo; Francesco Naddeo; Nicola Cappetti; Giovanni Francesco Solitro(2013). Optimisation of Mechanical characteristics distribution of a pre-meshed human vertebra based on CT scanning. JMEID@UNISA. Vol. 3(2). Pag.23-31 ISSN:2280-6407.
ID:57875 Articolo in rivista (262)
Alessandro NADDEO; Salvatore BARBA; Ignacio Francisco FERRERO FRANCIA(2013). PROPUESTA DE UN NUEVO MÉTODO NO INVASIVO PARA EL ANÁLISIS POSTURAL CON APLICACIONES DE FOTOGRAMETRÍA 4D. In: Proceedings of CIBIM 2013, XI Congreso Iberoamericano de Ingenieria Mecanica La Plata, Argentina 11-14 November 2013 La Plata UNIVERSIDAD NACIONAL DE LA PLATA - UNLP-FEIBIM Vol.-, Pag.3654-3664
ID:57879 Contributo in Atti di convegno (273)
Alessandro Naddeo; Nicola Cappetti; Rosaria Califano; Mariarosaria Vallone(2013). Manual assembly workstation redesign based on a new quantitative method for postural comfort evaluation. In Honghua Tan APPLIED MECHANICS AND MATERIALS, VOl.459 Pag.368-379 Durnten-Zurich, Honghua Tan, Trans Tech Publication Ltd., Switzerland. ISBN:9783037859230 ISSN:1660-9336.
ID:57898 Contributo in volume (Capitolo o Saggio) (268)
Alessandro Apostolico;Nicola Cappetti;Carmine D’Oria;Alessandro Naddeo;Marco Sestri(2013). Postural comfort evaluation: experimental identification of Range of Rest Posture for human articular joints. INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING. Pag.1-14 ISSN:1955-2513.
ID:55038 Articolo in rivista (262)
Alessandro Naddeo(2013). Virtual Comfort Evaluation as a New Paradigm of Health and Safety in Industrial Engineering. INDUSTRIAL ENGINEERING & MANAGEMENT. Vol. 2. Pag.1-3 ISSN:2169-0316.
ID:57870 Articolo in rivista (262)

2012

Alessandro Apostolico; Nicola Cappetti; Carmine D'Oria; Alessandro Naddeo; Marco Sestri(2012). Postural Comfort Evaluation: Experimental Identification of Range of Posture for human articular joints. In: Proceedings of ADM Workshop 2012, The italian event of Virtual Concept Workshop Anacapri (Italy) 19-21 September 2012 Napoli Associazione Disegno di Macchine Vol.1, Pag.1-8 ISBN:8890209690
ID:50995 Contributo in Atti di convegno (273)
R. Citarella; E. Armentani; F. Caputo; A. Naddeo(2012). FEM and BEM Analysis of a Human Mandible with Added Temporomandibular Joints. THE OPEN MECHANICAL ENGINEERING JOURNAL. Vol. 6. Pag.100-114 ISSN:1874-155X.
ID:50576 Articolo in rivista (262)

2011

N. Cappetti; C. D'Oria; A. Naddeo(2011). New comfort evaluation criteria: application on movie-theatre design. In: IMProVe 2011 - Proceedings Venezia (Italy) June 15th-17th 2011 Padova Lbreria Cortina Pag.01-06 ISBN:9788877843289
ID:36664 Contributo in Atti di convegno (273)

2010

Alessandro NADDEO; Nicola CAPPETTI; Michele PAPPALARDO.(2010). CAD ACTIVE MODELS: AN INNOVATIVE METHOD IN ASSEMBLY ENVIRONMENT.. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 5. Pag.35-38 ISSN:1843-3766.
ID:33092 Articolo in rivista (262)
Versione online
N. Cappetti ; L. Garofalo; A. Naddeo; M. Nastasia; A. Pellegrino.(2010). A method for setting variables in Super Plastic Forming process.. In: Proceedings of 18th International Conference AMME . Zakopane (Poland) 14-15 June 2010. Zakopane (Poland) Laszek A. Dobrzanski. Vol.unico., Pag.1-9 ISBN:9788389728722
ID:33091 Contributo in Atti di convegno (273)
Nicola CAPPETTI; Alessandro NADDEO; Arcangelo PELLEGRINO; Giovanni Francesco SOLITRO; Francesco NADDEO(2010). PARAMETRIC MODEL OF LUMBAR VERTEBRA. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 7. Pag.15-18 ISSN:1843-3766.
ID:32901 Articolo in rivista (262)
Versione online
N. Cappetti; A. Naddeo; F. Naddeo; G.F. Solitro..(2010). Influence of the disk geometry on different FEM models of the spine. In: Proceedings of 9th international symposium on Computer Methods in Biomechanics and Biomedical Engineering Valencia (SPAIN).. 24-27/02/2010. London (UK).. ARUP. Vol.unico, Pag.713-718 ISBN:9780956212139
ID:34434 Contributo in Atti di convegno (273)
N. Cappetti; A. Naddeo; F. Naddeo; G.F. Solitro.(2010). Method for mechanical characterization of pre-meshed tissues based on CT scanning. In: Proceedings of 9th international symposium on Computer Methods in Biomechanics and Biomedical Engineering. Valencia (SPAIN). 24-27/02/2010 London (UK). ARUP Vol.unico, Pag.19-24 ISBN:9780956212139
ID:34433 Contributo in Atti di convegno (273)
A. Naddeo; C D'Oria; N. Cappetti; M. Pappalardo(2010). Postural analysis in HMI design: an extension of OCRA standard to evaluate discomfort level. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 39. Pag.60-70 ISSN:1734-8412.
ID:31321 Articolo in rivista (262)
Versione online
N. Cappetti; L. Garofalo; A. Naddeo; M. Nastasia; A. Pellegrino(2010). A method for setting variables in Super Plastic Forming process. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 38/2. Pag.187-194 ISSN:1734-8412.
ID:31266 Articolo in rivista (262)
Versione online
A. Naddeo ; C. D’Oria; N. Cappetti; M. Pappalardo.(2010). Postural Analysis in HMI design: an extension of OCRA standard to evaluate discomfort level .. In: Proceedings of 18th International Conference AMME .. Zakopane (Poland). 14-15 June 2010. Zakopane (Poland) Laszek A. Dobrzanski Vol.unico, Pag.1-11 ISBN:9788389728722
ID:33088 Contributo in Atti di convegno (273)

2009

NADDEO A.; MEMOLI S(2009). Postural Comfort Inside a Car: Development of an Innovative Model to Evaluate the Discomfort Level. In: SAE Papers in SAE World Congress DETROIT (MI) - U.S.A. 20-23 April 2009 DETROIT SAE International Vol.09B-0416, Pag.1-6 ISBN:9781111111113
ID:29159 Contributo in Atti di convegno (273)
M. Pappalardo; A. Naddeo; C. D'oria; A. Pellegrino; N. Cappetti(2009). METHODOLOGY DEVELOPMENT OF HUMAN TASK SIMULATION DURING A CITY-RIDE, USING OCRA ERGONOMIC ANALYSIS. In: proceedings del Congreso Internacional Conjunto XXI INGEGRAF - XVII ADM LUGO 10-12 June 2009 LUGO Universidad de Santiago de Compostela - INGEGRAF Vol.unico, Pag.--- ISBN:9788496351547
ID:30945 Contributo in Atti di convegno (273)
NADDEO A; D'ORIA C; M. PAPPALARDO; CAPPETTI N; PELLEGRINO A(2009). Valutazione preventiva dell’ergonomia di guida nella progettazione di veicoli. In: Atti del convegno TORINO 8-9 Settembre 2009 TORINO ADM Vol.unico, Pag.--- ISBN:9788890209673
ID:30946 Contributo in Atti di convegno (273)
NADDEO A.; D'ORIA C; PAPPALARDO M; CAPPETTI N; PELLEGRINO A(2009). METHODOLOGY DEVELOPMENT OF HUMAN TASK SIMULATION DURING A CITY-RIDE, USING OCRA ERGONOMIC ANALYSIS. In: Atti del convegno Torino 8-9 Settembre 2009 TORINO ADM - Associazione Disegno di Macchine Vol.unico, Pag.--- ISBN:9788890209673
ID:29158 Contributo in Atti di convegno (273)
NADDEO A.; MEMOLI S(2009). Postural Comfort Inside a Car: Development of an Innovative Model to Evaluate the Discomfort Level. SAE INTERNATIONAL JOURNAL OF PASSENGER CARS - MECHANICAL SYSTEMS. Vol. 1. Pag.1065-1070 ISSN:1946-3995.
ID:27733 Articolo in rivista (262)

2008

NADDEO A.; ANNARUMMA M; RICCIO A; SESSA F(2008). New methods for workcells simulation and ergonomic analysis with delmia software. In: proceedings of XX Congreso internacional de ingenieria grafica VALENCIA 4,5,6 June 2008 VALENCIA ADM-INGEGRAF Vol.cd-rom, Pag.--- ISBN:9788483632758
ID:21941 Contributo in Atti di convegno (273)
NADDEO A.; RICCIO A; TALAMO L(2008). Strumenti e metodi di virtual manufacturing per la valutazione ergonomica preventiva di una postazione di lavoro. In: Proceedings of VRtest 2008, Tools and perspectives in virtual manufacturing Napoli (IT) 10-11 Luglio 2008 NAPOLI Università degli Studi di Napoli Federico II Vol.cd-rom, Pag.--- ISBN:9788895122137
ID:21942 Contributo in Atti di convegno (273)
ANNARUMMA M; CAPPETTI N; NADDEO A; M. PAPPALARDO(2008). State of the art of the passive pedestrian safety simulation. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 30. Pag.51-58 ISSN:1734-8412.
ID:30367 Articolo in rivista (262)
Versione online
ANNARUMMA M; CAPPETTI N; NADDEO A; M. PAPPALARDO(2008). State of the art of the passive pedestrian safety simulation. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 30. Pag.51-58 ISSN:1734-8412.
ID:30367 Articolo in rivista (262)
Versione online
NADDEO A.; TALAMO L; SESSA F; RICCIO A; DI PARDO M(2008). Methodology Development for Ergonomic Analysis of Work-Cells in Virtual Environment. In: SAE paper n. 08B-391 DETROIT (MI) - U.S.A. 14-17 April 2008 DETROIT SAE International Vol.08B-391, Pag.1-4 ISBN:9781111111113
ID:21943 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In IFIP INTERNATIONAL FEDERATION FOR INFORMATION PROCESSING Computer-Aided Innovation Pag.19-29 BOSTON, Springer. ISBN:9780387096964
ID:21940 Contributo in volume (Capitolo o Saggio) (268)
PAPPALARDO M.; NADDEO A; ANNARUMMA M(2008). State of the art on Pedestrian Safety Simulation. In: proceedings of AMME ’08 (Achivements In Materials And Manufacturing Engineering) GLIWICE-RYN (poland) 22-25 June 2008 GLIWICE-RYN Laszek Dobrzansky Vol.27, Pag.67-70 ISBN:9788389728470
ID:29953 Contributo in Atti di convegno (273)
A. NADDEO; PELLEGRINO A.; G.F. SOLITRO(2008). Spinal FEM analyses based on parametric CAD model of vertebra.. In: Proceedings of the International Symposium CMBBE2008: Porto (Portogallo) Febbraio 2008 Cardiff (Wales, UK) J. Middleton, S.L. Evans, C. Holt, C Jacobs, B. Walker Vol.1, Pag.374-379 ISBN:9780956212108
ID:29952 Contributo in Atti di convegno (273)
Naddeo Alessandro; Pappalardo Michele; Annarumma Marina(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In G. Cascini IFIP INTERNATIONAL FEDERATION FOR INFORMATION PROCESSING Pag.19-29 , . ISSN:1571-5736.
ID:50701 Contributo in volume (Capitolo o Saggio) (268)
PAPPALARDO M.; NADDEO A; ANNARUMMA M(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In: proceedings of WCC 2008 (World Computer Congress) Milano (IT) 7-10 September 2008 MILANO WCC Vol.cd-rom, Pag.--- ISBN:9780387096964
ID:21944 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2008). Software independence: impact on Product Development Plan in Automotive Industries. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 18. Pag.431-438 ISSN:1734-8412.
ID:13959 Articolo in rivista (262)

2007

NADDEO A; CAPPETTI N.; NADDEO F; PAPPALARDO M(2007). CRANIOENCEPHALIC TRAUMA, IN HELMET PROTECTED HUMANS, MODELED USING CAD/FEM TECHNIQUES. INABIO (Caracas, Venezuela) 17-19 September 2007 Vol.unico, Pag.97-104 ISBN:9789806939103
ID:18738 Contributo in Atti di convegno (273)
NADDEO A.(2007). A New Method for Measuring Solution Approximation using α-cut in Industrial Design Problems formulated by Axiomatic Framework and Para-Complete Logic. In: Proceedings of IPMM 2007 International Conference Salerno (ITALY) 25-29 June 2007 Vol.cd, Pag.cd-file
ID:18905 Contributo in Atti di convegno (273)
NADDEO A.; SOLITRO G.F; CAPPETTI N; AMATO G(2007). A CUSTOMIZABLE SPINAL COLUMN CAD MODEL. In: Proceedings of ICCB 2007, III International Congress on Computational Bioengineering Isla de Margarita (Venezuela) 17-19 September 2007 CARACAS INABIO Vol.unico, Pag.91-96 ISBN:9789806939103
ID:18906 Contributo in Atti di convegno (273)
G.F. SOLITRO; CAPPETTI N.; G. AMATO; A. NADDEO(2007). A CUSTOMIZABLE SPINAL COLUMN CAD MODEL. In: Proceedings of ICCB 2007 III International Congress on Computational Bioengineering Isla Margarita, Venezuela 17-19 September 2007 Caracas INABIO (Caracas, Venezuela) Vol.unico, Pag.91-96 ISBN:9789806939103
ID:18737 Contributo in Atti di convegno (273)
AMATO G; CAPPETTI N.; NADDEO A(2007). Active Models of Mechanisms in Assembly Environment. In: Dall'idea al Prodotto: la rappresentazione come base per lo sviluppo e l'innovazione Perugia 6-8 giugno 2007 PISA edizioni ETS Pag.505-512 ISBN:9788846718419
ID:18733 Contributo in Atti di convegno (273)

2006

NADDEO A.(2006). AXIOMATIC FRAMEWORK APPLIED TO INDUSTRIAL DESIGN PROBLEM FORMULATED BY PARA-COMPLETE LOGICS APPROACH: THE POWER OF DECOUPLING ON OPTIMIZATION-PROBLEM SOLVING. In: Proceedings of The Fourth International Conference on Axiomatic Design (proceedings on CD, Abstracts on book) Firenze June 13-16, 2006 FIRENZE UNIVERSITA' DI FIRENZE Vol.unico, Pag.17-17 ISBN:0000000000
ID:13960 Contributo in Atti di convegno (273)
NADDEO A.; AMATO G; PAPPALARDO M(2006). MATERIAL'S BEHAVIOR MODELING METHOD BASED ON DEVELOPMENT OF "ACTIVE MODEL" FOR PHYSICS-BASED CAD. Salvador de Bahia, Brazil 06-10 Agosto 2006 SAN PAOLO San Paolo University Vol.unico, Pag.--- ISBN:9788586686399
ID:13961 Contributo in Atti di convegno (273)
CAPPETTI N.; A. DONNARUMMA; A. NADDEO; L. RUSSO(2006). Design of experiment about foam CF45 for pedestrian safetyin car design. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 175. Pag.77-82 ISSN:0924-0136.
ID:13665 Articolo in rivista (262)
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2006). Software independence: impact on Product Development Plan in Automotive Industries. In: Proceedings of International Conference on Achievements in Materials and Manufacturing Engineering (proceedings on DVD, abstract on book) Gliwice - Wisla (Poland) 4-8 June 2006 WISLA L.A. Dobrzanski Vol.unico, Pag.431-434 ISBN:9788389728203
ID:13962 Contributo in Atti di convegno (273)

2005

NADDEO A.; PAPPALARDO MICHELE; CARMANDO REMIGIO; LISANTI ROBERTO(2005). CRASH ANALYSIS OF AUTOMOTIVE STRUCTURAL MEMBERS, UNDER BENDING LOADS DUE TO HIGH VELOCITY IMPACT, AND EVALUATION OF METAL FORMING PROCESS MEMORY ON CRASH BEHAVIOR. In: Proceedings of Congreso Internacional XVII INGEGRAF - XV ADM Sevilla (Spain) 1-3 Giugno 2005 Sevilla INGEGRAF Vol.unico, Pag.267-267 ISBN:9788492325337
ID:6038 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI N; NICOLINO F(2005). FUZZY INFERENTIAL SYSTEM FOR CORRECTION OF HOLE-DIAMETER MEASUREMENT USING A COORDINATE MEASURING MACHINE. In: Proceedings of Fifth IPMM Conference Monterey (CA), U.S.A. July 19 - 23, 2005, John Meech Vol.Unico, Pag.--- ISBN:0849314933
ID:6885 Contributo in Atti di convegno (273)
NADDEO A.; PAPPALARDO MICHELE(2005). Failure mode analysis using Axiomatic Design and Non-Probabilistic Information. In: Proceedings of 13th International Conference on Achievements on Mechanical and Materials Engineering Gliwice (Poland) 16th-19th May 2005 L.A. Dobrzansky Vol.unico, Pag.517-522 ISBN:8389728133
ID:6887 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI NICOLA; ANNARUMMA MARINA; AMATO GIUSEPPE(2005). STATE OF THE ART ON PEDESTRIAN SAFETY: SIMULATION AND DESIGN SOLUTION FOR AUTOMOTIVE INDUSTRIES. In: Proceedings of Congreso Internacional XVII INGEGRAF - XV ADM Sevilla (Spain) 1-3 Giugno 2005 Sevilla INGEGRAF Vol.unico, Pag.1-9 ISBN:9788492325337
ID:6037 Contributo in Atti di convegno (273)
PAPPALARDO M.; A. NADDEO(2005). Failure mode analysis using Axiomatic Design and Non-Probabilistic Information. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 164-165. Pag.1423-1429 ISSN:0924-0136.
ID:6789 Articolo in rivista (262)
NADDEO A.; CAPPETTI N; PAPPALARDO M(2005). USING ALFA-CUT FOR OPTIMIZATION OF DESIGNS FORMULATED BY AXIOMATIC THEORY AND PARA-COMPLETE LOGIC. In: Proceedings of IPMM CONFERENCE Monterey (CA), U.S.A. July 19 - 23, 2005 CRC Press Vol.Unico, Pag.--- ISBN:0849314933
ID:6886 Contributo in Atti di convegno (273)
NADDEO A.; PAPPALARDO M; MONACELLI G; MATTERA M(2005). NUMERICAL/EXPERIMENTAL CHARACTERIZATION OF COPOLYMERS WITH MINERAL CHARGE, FOR AUTOMOTIVE APPLICATION, to SIMULATe CRASH EVENTS. In: Proceedings of 2005 ATA International Conference Pomigliano d'Arco (NA) - Italy October 20-21, Vol.-, Pag.---
ID:6867 Contributo in Atti di convegno (273)

2004

NADDEO A.; CARMANDO R.; CAPPETTI N.; ANNARUMMA M.(2004). Upper Leg impactor modelling for Pedestrian Test simulation using F.E.M. explicit codes. In: 8TH WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL IX, PROCEEDINGS: COMPUTER SCIENCE AND ENGINEERING Orlando (FL - U.S.A.). 18-21 of July 2004 Orlando (FL) - USA Callaos, N; Kim, TH; Chen, JC; Fung, WK; Naddeo, A Vol.IX, Pag.104-109 ISBN:9806560132
ID:6040 Contributo in Atti di convegno (273)
NADDEO A.(2004). New Child/Adult Head impactor modelling for Pedestrian Test simulation, according to EEVC WG17 protocol - rel. 2002, using FEM explicit codes. In: Proceedings of XIV ADM - XXXIII AIAS 31/08 - 02/09 2004 - Bari (Italy) ADM - Associazione Disegno di Macchine Pag.409-409 ISBN:9788890063725
ID:6039 Contributo in Atti di convegno (273)
NADDEO A.(2004). Axiomatic design of a concept of car-platform for an electrical rear-wheel drive vehicle: a comparison with a fuzzy approach. In: Proceedings of ICAD 2004 International Conference on Axiomatic Design Seoul (Rep. of South Korea) 21-24 of June 2004 - Vol.-, Pag.---
ID:6868 Contributo in Atti di convegno (273)
ANNARUMMA M.; A. NADDEO; M. PAPPALARDO(2004). New child/adult head impactor modelling for pedestrian test simulation, according to EEVC WG17 protocol - rel. 2002, using fem explicit codes. Bari 31 Agosto - 2 Settembre 2004 Pag.-----
ID:10701 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI N; PAPPALARDO M(2004). Design decoupling method based on para-complete logics. In: Proceedings of ICAD 2004 Seoul (Rep. of South Korea) 21-24 of June 2004 Vol.-, Pag.---
ID:6869 Contributo in Atti di convegno (273)
NADDEO A.; CARMANDO R.; CAPPETTI N.; PAPPALARDO M.(2004). Lower Leg impactor modelling for Pedestrian Test simulation using F.E.M. explicit codes. In: 8TH WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL IX, PROCEEDINGS: COMPUTER SCIENCE AND ENGINEERING Orlando (FL - U.S.A.) 18-21 of July 2004 Orlando, FL Callaos, N; Kim, TH; Chen, JC; Fung, WK; Naddeo, A Vol.IX, Pag.98-103 ISBN:9806560132
ID:6049 Contributo in Atti di convegno (273)

2003

NADDEO A.; PELLEGRINO A.; PAPPALARDO M.(2003). Using Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.421-425 ISBN:9806560019
ID:6046 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.; MONACELLI G.; PARRELLA A.(2003). Virtual and numerical simulation of under-bonnet elements influence on pedestrian head impacts. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.409-414 ISBN:9806560019
ID:6047 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M.(2003). Virtual evaluation of energy exchange between two deformable body during low-energy impact. Application to the case of “Head on bonnet” impact according to WG17 and ACEA protocol. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.415-420 ISBN:9806560019
ID:6048 Contributo in Atti di convegno (273)
DONNARUMA A; PAPPALARDO M; CAPPETTI N; NADDEO A.; PELLEGRINO A(2003). I Grafi come modelli nell’analisi delle tensioni. In: Proceedings of International Conference XIII ADM - XV INGEGRAF ’03 Cassino-Salerno-Napoli, Italy 03-06 June 2003 Vol.1, Pag.---
ID:6877 Contributo in Atti di convegno (273)
NADDEO A.; N. CAPPETTI; A. DONNARUMMA; G. MASCIOCCO; G. MONACELLI(2003). Experimental Characterization of Cellular Foam Type CF-45 Blue and itsModelling by the FEM Explicit Code PamCrash: Proposal to CharacterizeFoam with a Compression Test using Controlled Strain Rates. In F. CAPUTO; G. MONACELLI Modelli Virtuali nella Progettazione Automobilistica Pag.135-146 NAPOLI, . ISBN:9788890008153
ID:6875 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A.; MONACELLI G. ET ALII(2003). L’esperienza di collaborazione di ricerca tra ELASIS e il Dipartimento di Ingegneria Meccanica (DIMEC) dell’Università degli Studi di Salerno: il Progetto Pedestrian Safety. In: Proceedings of ATA Workshop 2003 Trento – Italy 26-27 of June 2003 Vol.-, Pag.---
ID:6880 Contributo in Atti di convegno (273)
NADDEO A.(2003). A study on the influence of mass distribution on thin walled beam for vehicle use (made by tailored-welded-blanks) in crash performance at high and medium velocity. In: Proceedings of International Conference XIII ADM - XV INGEGRAF ’03 Cassino-Salerno-Napoli, Italy 03-06 June 2003 Vol.1, Pag.---
ID:6878 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A; CAPPETTI N; MONACELLI G; MASCIOCCO G(2003). Experimental characterization of Cellular Foam type CF-45 Blue and its modelling by the FEM explicit code PamCrash: a proposal to characterize foam with a compression test made with controlled strain-rate values. In: Intelligent Applications in a Material World: Selected Papers from IPMM-2003 Sendai – Japan 19-23 May 2003 Vancouver (CANADA) CRC Press Vol.1, Pag.--- ISBN:0849319285
ID:6879 Contributo in Atti di convegno (273)
NADDEO A.; MONACELLI G.; PETRELLA V.(2003). Lower leg impactor’s knee joint modellation for pedestrian test simulation using explicit codes. In F. CAPUTO; G. MONACELLI; A. SOPRANO Tools and Methods Evolution in Automotive Design Pag.71-81 NAPOLI, . ISBN:9788890008160
ID:6874 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A; PELLEGRINO A; PAPPALARDO M.(2003). Advances on Use of Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. settembre Vol.-, Pag.---
ID:6798 Contributo in Atti di convegno (273)
NADDEO A.; MONACELLI G; PETRELLA V(2003). Lower leg impactor’s knee joint modellation for pedestrian test simulation using explicit codes. 03-06 June 2003 Vol.1, Pag.---
ID:6881 Contributo in Atti di convegno (273)
NADDEO A.; PELLEGRINO A.; PAPPALARDO M.(2003). Advance on use of Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. In: Proceedings of IMC-20 Irish Manufacturing Committe Cork, Ireland 2-5 of September 2003 Cork Institute of Technology Vol.1, Pag.230-237 ISBN:9780954573607
ID:6044 Contributo in Atti di convegno (273)
MONACELLI G.; PETRELLA V.; NADDEO A.(2003). New Methodologies to study in a Virtual Reality Centre the automotive behaviour during different Crash Tests. In F. CAPUTO; G. MONACELLI Modelli Virtuali nella Progettazione Automobilistica Pag.97-104 NAPOLI, . ISBN:9788890008153
ID:6873 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A.; MONACELLI G. ET ALII(2003). L’esperienza di collaborazione di ricerca tra ELASIS e il Dipartimento di Ingegneria Meccanica (DIMEC) dell’Università degli Studi di Salerno: il Progetto Pedestrian Safety. ATA. Vol. 56. Pag.347-347 ISSN:0001-2661.
ID:6870 Articolo in rivista (262)

2002

MONACELLI G; PETRELLA V; NADDEO A.; DONNARUMMA A; CAPPETTI N(2002). A study on structural behaviour of a car-bonnet during child-head impact, using parametric-variational cad/cae modelling techniques and numeric computation by explicit codes. In: Proceedings of XXXI AIAS Parma Italy 18-20 September 2002 Vol.1, Pag.---
ID:6883 Contributo in Atti di convegno (273)
MONACELLI G; PETRELLA V; NADDEO A.(2002). New Methodologies to study in a Virtual Reality Centre the automotive behaviour during different Crash Tests. In: Proceedings of 8th HTCES - (HIGH-TECH CARS AND ENGINES) Modena (IT) 30-31 May 2002 Vol.1, Pag.---
ID:6884 Contributo in Atti di convegno (273)
ARMENTANI E; CAPUTO F; CITARELLA R; INFANTE M; LAVORGNA G; NADDEO A.(2002). Analisi fem di una mandibola umana con relativa articolazione temporo-mandibolare. In: Proceedings of XXXI AIAS Parma-Italy 18 – 21 settembre 2002 Vol.1, Pag.---
ID:6882 Contributo in Atti di convegno (273)
CAPPETTI N.; DONNARUMMA A.; NADDEO A.; RUSSO L.(2002). D.O.E. about foam CF45 for pedestrian safety in car design. In: Proceedings of AMME ’02 (Achievements in Mechanical & Materials Engineering) Zakopane – Poland 16-18 December 2002 OCSCO World Press Vol.1, Pag.31-38 ISBN:9788391445877
ID:6043 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.; PAPPALARDO M.(2002). Fuzzy logic application in the structural optimisation of a support plate for electrical accumulator in motor vehicle. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 120. Pag.303-309 ISSN:0924-0136.
ID:6871 Articolo in rivista (262)

2001

DONNARUMMA A; PAPPALARDO M.; CAPPETTI N; NADDEO A(2001). Sensitivity analysis on results of fuzzy optimisation of a support plate for hybrid-propelled vehicle application. In: Proceedings of 7th International Conference ATA Florence Florence May 2005 Vol.-, Pag.---
ID:6805 Contributo in Atti di convegno (273)
NADDEO A.(2001). Application of Fuzzy logic in design phase of car-platform for an electrical rear-wheel drive vehicle. In: Proceedings of XII ADM Rimini (Italia) 5-7 September 2001 Vol.1, Pag.A4-20
ID:6042 Contributo in Atti di convegno (273)

2000

NADDEO A.; DONNARUMMA A.; CAPPETTI N.; PAPPALARDO M.(2000). Fuzzy logic application in the structural optimisation of a support plate for electrical accumulator in motor vehicle. In: IMC-17 Proceedings Galway-Ireland 23-25 Aug 2000 GAlway (IR) National University of Galway Vol.1, Pag.147-156 ISBN:9780953897407
ID:6041 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.(2000). Un pianale per veicoli non convenzionali. LAMIERA. Vol. 9. Pag.172-181 ISSN:0391-5891.
ID:6872 Articolo in rivista (262)

Articolo in rivista (262)

Vallone, M.; Naddeo, A; Cappetti, N.; Califano, R.(2015). Comfort driven redesign methods: An application to mattresses production systems. THE OPEN MECHANICAL ENGINEERING JOURNAL. Vol. 9. Pag.492-507 ISSN:1874-155X.
ID:85716 Articolo in rivista (262)
Versione online
Cappetti, N.; Naddeo, A.; Naddeo, F; Solitro, G.F.(2015). Finite elements/Taguchi method based procedure for the identification of the geometrical parameters significantly affecting the biomechanical behavior of a lumbar disc. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING. Pag.1-8 ISSN:1025-5842.
ID:83848 Articolo in rivista (262)
Versione online
Naddeo, A.; Cappetti, N.; D'Oria, C.(2015). Proposal of a new quantitative method for postural comfort evaluation. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS. Vol. 48. Pag.25-35 ISSN:0169-8141.
ID:68111 Articolo in rivista (262)
Naddeo, Alessandro; Cappetti, Nicola; Califano, Rosaria; Vallone, Mariarosaria(2015). The Role of Expectation in Comfort Perception: The Mattresses’ Evaluation Experience. PROCEDIA MANUFACTURING. Vol. 3. Pag.4784-4791 ISSN:2351-9789.
ID:85717 Articolo in rivista (262)
Versione online
Naddeo, Alessandro(2015). Optimization and solution approximation of design problems formulated by axiomatic design and paracomplete logic. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH. Vol. 10. Pag.38058-38064 ISSN:0973-4562.
ID:83847 Articolo in rivista (262)
Versione online
Naddeo, Alessandro(2015). Axiomatic design of a car bonnet: A new decoupling method based on fuzzy logic application. INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH. Vol. 10. Pag.23859-23870 ISSN:0973-4562.
ID:83846 Articolo in rivista (262)
Versione online
Baldino, L.; Naddeo, F.; Cardea, S; Naddeo, A.; Reverchon, E.(2015). FEM modeling of the reinforcement mechanism of Hydroxyapatite in PLLA scaffolds produced by supercritical drying, for Tissue Engineering applications. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Vol. 51. Pag.225-236 ISSN:1751-6161.
ID:78930 Articolo in rivista (262)
Versione online
Naddeo A., Vallone M., Fasulo L.(2015). ERGONOMIC ANALYSIS AND COMFORT DRIVEN REDESIGN OF STUDENT CLASSROOM COMBO DESKS AT UNIVERSITY OF SALERNO-ITALY. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 10. Pag.87-98 ISSN:1843-3766.
ID:68113 Articolo in rivista (262)
Alessandro Naddeo; Francesco Naddeo; Nicola Cappetti(2014). Automatic versatile parametric procedure for a complete FEM structural analysis of composites having cylinder-shaped reinforcing fibres. COMPUTATIONAL MATERIALS SCIENCE. Vol. 81. Pag.239-245 ISSN:0927-0256.
ID:57865 Articolo in rivista (262)
Alessandro Apostolico;Nicola Cappetti;Carmine D’Oria;Alessandro Naddeo;Marco Sestri(2013). Postural comfort evaluation: experimental identification of Range of Rest Posture for human articular joints. INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING. Pag.1-14 ISSN:1955-2513.
ID:55038 Articolo in rivista (262)
Alessandro Naddeo; Francesco Naddeo; Nicola Cappetti; Giovanni Francesco Solitro(2013). Optimisation of Mechanical characteristics distribution of a pre-meshed human vertebra based on CT scanning. JMEID@UNISA. Vol. 3(2). Pag.23-31 ISSN:2280-6407.
ID:57875 Articolo in rivista (262)
Alessandro Naddeo(2013). Virtual Comfort Evaluation as a New Paradigm of Health and Safety in Industrial Engineering. INDUSTRIAL ENGINEERING & MANAGEMENT. Vol. 2. Pag.1-3 ISSN:2169-0316.
ID:57870 Articolo in rivista (262)
R. Citarella; E. Armentani; F. Caputo; A. Naddeo(2012). FEM and BEM Analysis of a Human Mandible with Added Temporomandibular Joints. THE OPEN MECHANICAL ENGINEERING JOURNAL. Vol. 6. Pag.100-114 ISSN:1874-155X.
ID:50576 Articolo in rivista (262)
N. Cappetti; L. Garofalo; A. Naddeo; M. Nastasia; A. Pellegrino(2010). A method for setting variables in Super Plastic Forming process. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 38/2. Pag.187-194 ISSN:1734-8412.
ID:31266 Articolo in rivista (262)
Versione online
Alessandro NADDEO; Nicola CAPPETTI; Michele PAPPALARDO.(2010). CAD ACTIVE MODELS: AN INNOVATIVE METHOD IN ASSEMBLY ENVIRONMENT.. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 5. Pag.35-38 ISSN:1843-3766.
ID:33092 Articolo in rivista (262)
Versione online
A. Naddeo; C D'Oria; N. Cappetti; M. Pappalardo(2010). Postural analysis in HMI design: an extension of OCRA standard to evaluate discomfort level. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 39. Pag.60-70 ISSN:1734-8412.
ID:31321 Articolo in rivista (262)
Versione online
Nicola CAPPETTI; Alessandro NADDEO; Arcangelo PELLEGRINO; Giovanni Francesco SOLITRO; Francesco NADDEO(2010). PARAMETRIC MODEL OF LUMBAR VERTEBRA. JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS. Vol. 7. Pag.15-18 ISSN:1843-3766.
ID:32901 Articolo in rivista (262)
Versione online
NADDEO A.; MEMOLI S(2009). Postural Comfort Inside a Car: Development of an Innovative Model to Evaluate the Discomfort Level. SAE INTERNATIONAL JOURNAL OF PASSENGER CARS - MECHANICAL SYSTEMS. Vol. 1. Pag.1065-1070 ISSN:1946-3995.
ID:27733 Articolo in rivista (262)
ANNARUMMA M; CAPPETTI N; NADDEO A; M. PAPPALARDO(2008). State of the art of the passive pedestrian safety simulation. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 30. Pag.51-58 ISSN:1734-8412.
ID:30367 Articolo in rivista (262)
Versione online
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2008). Software independence: impact on Product Development Plan in Automotive Industries. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 18. Pag.431-438 ISSN:1734-8412.
ID:13959 Articolo in rivista (262)
ANNARUMMA M; CAPPETTI N; NADDEO A; M. PAPPALARDO(2008). State of the art of the passive pedestrian safety simulation. JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING. Vol. 30. Pag.51-58 ISSN:1734-8412.
ID:30367 Articolo in rivista (262)
Versione online
CAPPETTI N.; A. DONNARUMMA; A. NADDEO; L. RUSSO(2006). Design of experiment about foam CF45 for pedestrian safetyin car design. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 175. Pag.77-82 ISSN:0924-0136.
ID:13665 Articolo in rivista (262)
PAPPALARDO M.; A. NADDEO(2005). Failure mode analysis using Axiomatic Design and Non-Probabilistic Information. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 164-165. Pag.1423-1429 ISSN:0924-0136.
ID:6789 Articolo in rivista (262)
NADDEO A.; MONACELLI G. ET ALII(2003). L’esperienza di collaborazione di ricerca tra ELASIS e il Dipartimento di Ingegneria Meccanica (DIMEC) dell’Università degli Studi di Salerno: il Progetto Pedestrian Safety. ATA. Vol. 56. Pag.347-347 ISSN:0001-2661.
ID:6870 Articolo in rivista (262)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.; PAPPALARDO M.(2002). Fuzzy logic application in the structural optimisation of a support plate for electrical accumulator in motor vehicle. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Vol. 120. Pag.303-309 ISSN:0924-0136.
ID:6871 Articolo in rivista (262)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.(2000). Un pianale per veicoli non convenzionali. LAMIERA. Vol. 9. Pag.172-181 ISSN:0391-5891.
ID:6872 Articolo in rivista (262)

Contributo in volume (Capitolo o Saggio) (268)

Salvatore, Barba; Fausta, Fiorillo; Alessandro, Naddeo; Davide, Barbato(2014). Tecniche di image editing: un possibile “work flow” per le AP. In AA.VV. Prospettive architettoniche: conservazione digitale, divulgazione e studio Pag.871-886 Roma, Sapienza Università Editrice.
ID:77582 Contributo in volume (Capitolo o Saggio) (268)
Alessandro Naddeo; Nicola Cappetti; Rosaria Califano; Mariarosaria Vallone(2013). Manual assembly workstation redesign based on a new quantitative method for postural comfort evaluation. In Honghua Tan APPLIED MECHANICS AND MATERIALS, VOl.459 Pag.368-379 Durnten-Zurich, Honghua Tan, Trans Tech Publication Ltd., Switzerland. ISBN:9783037859230 ISSN:1660-9336.
ID:57898 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In IFIP INTERNATIONAL FEDERATION FOR INFORMATION PROCESSING Computer-Aided Innovation Pag.19-29 BOSTON, Springer. ISBN:9780387096964
ID:21940 Contributo in volume (Capitolo o Saggio) (268)
Naddeo Alessandro; Pappalardo Michele; Annarumma Marina(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In G. Cascini IFIP INTERNATIONAL FEDERATION FOR INFORMATION PROCESSING Pag.19-29 , . ISSN:1571-5736.
ID:50701 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A.; MONACELLI G.; PETRELLA V.(2003). Lower leg impactor’s knee joint modellation for pedestrian test simulation using explicit codes. In F. CAPUTO; G. MONACELLI; A. SOPRANO Tools and Methods Evolution in Automotive Design Pag.71-81 NAPOLI, . ISBN:9788890008160
ID:6874 Contributo in volume (Capitolo o Saggio) (268)
MONACELLI G.; PETRELLA V.; NADDEO A.(2003). New Methodologies to study in a Virtual Reality Centre the automotive behaviour during different Crash Tests. In F. CAPUTO; G. MONACELLI Modelli Virtuali nella Progettazione Automobilistica Pag.97-104 NAPOLI, . ISBN:9788890008153
ID:6873 Contributo in volume (Capitolo o Saggio) (268)
NADDEO A.; N. CAPPETTI; A. DONNARUMMA; G. MASCIOCCO; G. MONACELLI(2003). Experimental Characterization of Cellular Foam Type CF-45 Blue and itsModelling by the FEM Explicit Code PamCrash: Proposal to CharacterizeFoam with a Compression Test using Controlled Strain Rates. In F. CAPUTO; G. MONACELLI Modelli Virtuali nella Progettazione Automobilistica Pag.135-146 NAPOLI, . ISBN:9788890008153
ID:6875 Contributo in volume (Capitolo o Saggio) (268)

Contributo in Atti di convegno (273)

Alessandro Naddeo, Marco Apicella, Davide Galluzzi(2015). Comfort-Driven Design of Car Interiors: A Method to Trace Iso-Comfort Surfaces for Positioning the Dashboard Commands. In: Technical Paper of SAE 2015 World Congress & Exhibition Detroit (USA) 20-24 of April 2015 SAE International Vol.unico, Pag.--- ISBN:9780768077186
ID:68081 Contributo in Atti di convegno (273)
Alessandro Naddeo(2014). Axiomatic Design of a car bonnet: a new decoupling method based on Fuzzy Logic application. In: Proceedings of Asia-Pacific Materials Science and Information Technology Conference (APMSIT 2014) Shangai 13-14 December 2014 Shangai Engineering and Industry Technology Institute Vol.unico, Pag.1-8
ID:62117 Contributo in Atti di convegno (273)
Alessandro Naddeo;Nicola Cappetti;Orlando Ippolito(2014). Dashboard Reachability and Usability Tests: A Cheap and Effective Method for Drivers' Comfort Rating. In: Dashboard Reachability and Usability Tests: A Cheap and Effective Method for Drivers' Comfort Rating Detroit, MI; United States 8 April 2014 through 10 April 2014 Detroit SAE INTERNATIONAL Vol.unico, Pag.1-9
ID:62116 Contributo in Atti di convegno (273)
Alessandro Naddeo; Nicola Cappetti; Mariarosaria Vallone; Rosaria Califano(2014). New trend line of research about comfort evaluation: proposal of a framework for weighing and evaluating contributes coming from cognitive, postural and physiologic comfort perceptions. In: Advances in Social and Organizational Factors Cracovia (PL) 19-23 July 2014 Delft Peter Vink Vol.unico, Pag.503-515 ISBN:9781495121029
ID:62118 Contributo in Atti di convegno (273)
Alessandro NADDEO; Salvatore BARBA; Ignacio Francisco FERRERO FRANCIA(2013). PROPUESTA DE UN NUEVO MÉTODO NO INVASIVO PARA EL ANÁLISIS POSTURAL CON APLICACIONES DE FOTOGRAMETRÍA 4D. In: Proceedings of CIBIM 2013, XI Congreso Iberoamericano de Ingenieria Mecanica La Plata, Argentina 11-14 November 2013 La Plata UNIVERSIDAD NACIONAL DE LA PLATA - UNLP-FEIBIM Vol.-, Pag.3654-3664
ID:57879 Contributo in Atti di convegno (273)
Alessandro Apostolico; Nicola Cappetti; Carmine D'Oria; Alessandro Naddeo; Marco Sestri(2012). Postural Comfort Evaluation: Experimental Identification of Range of Posture for human articular joints. In: Proceedings of ADM Workshop 2012, The italian event of Virtual Concept Workshop Anacapri (Italy) 19-21 September 2012 Napoli Associazione Disegno di Macchine Vol.1, Pag.1-8 ISBN:8890209690
ID:50995 Contributo in Atti di convegno (273)
N. Cappetti; C. D'Oria; A. Naddeo(2011). New comfort evaluation criteria: application on movie-theatre design. In: IMProVe 2011 - Proceedings Venezia (Italy) June 15th-17th 2011 Padova Lbreria Cortina Pag.01-06 ISBN:9788877843289
ID:36664 Contributo in Atti di convegno (273)
A. Naddeo ; C. D’Oria; N. Cappetti; M. Pappalardo.(2010). Postural Analysis in HMI design: an extension of OCRA standard to evaluate discomfort level .. In: Proceedings of 18th International Conference AMME .. Zakopane (Poland). 14-15 June 2010. Zakopane (Poland) Laszek A. Dobrzanski Vol.unico, Pag.1-11 ISBN:9788389728722
ID:33088 Contributo in Atti di convegno (273)
N. Cappetti ; L. Garofalo; A. Naddeo; M. Nastasia; A. Pellegrino.(2010). A method for setting variables in Super Plastic Forming process.. In: Proceedings of 18th International Conference AMME . Zakopane (Poland) 14-15 June 2010. Zakopane (Poland) Laszek A. Dobrzanski. Vol.unico., Pag.1-9 ISBN:9788389728722
ID:33091 Contributo in Atti di convegno (273)
N. Cappetti; A. Naddeo; F. Naddeo; G.F. Solitro..(2010). Influence of the disk geometry on different FEM models of the spine. In: Proceedings of 9th international symposium on Computer Methods in Biomechanics and Biomedical Engineering Valencia (SPAIN).. 24-27/02/2010. London (UK).. ARUP. Vol.unico, Pag.713-718 ISBN:9780956212139
ID:34434 Contributo in Atti di convegno (273)
N. Cappetti; A. Naddeo; F. Naddeo; G.F. Solitro.(2010). Method for mechanical characterization of pre-meshed tissues based on CT scanning. In: Proceedings of 9th international symposium on Computer Methods in Biomechanics and Biomedical Engineering. Valencia (SPAIN). 24-27/02/2010 London (UK). ARUP Vol.unico, Pag.19-24 ISBN:9780956212139
ID:34433 Contributo in Atti di convegno (273)
M. Pappalardo; A. Naddeo; C. D'oria; A. Pellegrino; N. Cappetti(2009). METHODOLOGY DEVELOPMENT OF HUMAN TASK SIMULATION DURING A CITY-RIDE, USING OCRA ERGONOMIC ANALYSIS. In: proceedings del Congreso Internacional Conjunto XXI INGEGRAF - XVII ADM LUGO 10-12 June 2009 LUGO Universidad de Santiago de Compostela - INGEGRAF Vol.unico, Pag.--- ISBN:9788496351547
ID:30945 Contributo in Atti di convegno (273)
NADDEO A.; MEMOLI S(2009). Postural Comfort Inside a Car: Development of an Innovative Model to Evaluate the Discomfort Level. In: SAE Papers in SAE World Congress DETROIT (MI) - U.S.A. 20-23 April 2009 DETROIT SAE International Vol.09B-0416, Pag.1-6 ISBN:9781111111113
ID:29159 Contributo in Atti di convegno (273)
NADDEO A.; D'ORIA C; PAPPALARDO M; CAPPETTI N; PELLEGRINO A(2009). METHODOLOGY DEVELOPMENT OF HUMAN TASK SIMULATION DURING A CITY-RIDE, USING OCRA ERGONOMIC ANALYSIS. In: Atti del convegno Torino 8-9 Settembre 2009 TORINO ADM - Associazione Disegno di Macchine Vol.unico, Pag.--- ISBN:9788890209673
ID:29158 Contributo in Atti di convegno (273)
NADDEO A; D'ORIA C; M. PAPPALARDO; CAPPETTI N; PELLEGRINO A(2009). Valutazione preventiva dell’ergonomia di guida nella progettazione di veicoli. In: Atti del convegno TORINO 8-9 Settembre 2009 TORINO ADM Vol.unico, Pag.--- ISBN:9788890209673
ID:30946 Contributo in Atti di convegno (273)
NADDEO A.; RICCIO A; TALAMO L(2008). Strumenti e metodi di virtual manufacturing per la valutazione ergonomica preventiva di una postazione di lavoro. In: Proceedings of VRtest 2008, Tools and perspectives in virtual manufacturing Napoli (IT) 10-11 Luglio 2008 NAPOLI Università degli Studi di Napoli Federico II Vol.cd-rom, Pag.--- ISBN:9788895122137
ID:21942 Contributo in Atti di convegno (273)
PAPPALARDO M.; NADDEO A; ANNARUMMA M(2008). Methodology development of human task simulation as PLM solution related to OCRA ergonomic analysis. In: proceedings of WCC 2008 (World Computer Congress) Milano (IT) 7-10 September 2008 MILANO WCC Vol.cd-rom, Pag.--- ISBN:9780387096964
ID:21944 Contributo in Atti di convegno (273)
NADDEO A.; TALAMO L; SESSA F; RICCIO A; DI PARDO M(2008). Methodology Development for Ergonomic Analysis of Work-Cells in Virtual Environment. In: SAE paper n. 08B-391 DETROIT (MI) - U.S.A. 14-17 April 2008 DETROIT SAE International Vol.08B-391, Pag.1-4 ISBN:9781111111113
ID:21943 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M; RICCIO A; SESSA F(2008). New methods for workcells simulation and ergonomic analysis with delmia software. In: proceedings of XX Congreso internacional de ingenieria grafica VALENCIA 4,5,6 June 2008 VALENCIA ADM-INGEGRAF Vol.cd-rom, Pag.--- ISBN:9788483632758
ID:21941 Contributo in Atti di convegno (273)
A. NADDEO; PELLEGRINO A.; G.F. SOLITRO(2008). Spinal FEM analyses based on parametric CAD model of vertebra.. In: Proceedings of the International Symposium CMBBE2008: Porto (Portogallo) Febbraio 2008 Cardiff (Wales, UK) J. Middleton, S.L. Evans, C. Holt, C Jacobs, B. Walker Vol.1, Pag.374-379 ISBN:9780956212108
ID:29952 Contributo in Atti di convegno (273)
PAPPALARDO M.; NADDEO A; ANNARUMMA M(2008). State of the art on Pedestrian Safety Simulation. In: proceedings of AMME ’08 (Achivements In Materials And Manufacturing Engineering) GLIWICE-RYN (poland) 22-25 June 2008 GLIWICE-RYN Laszek Dobrzansky Vol.27, Pag.67-70 ISBN:9788389728470
ID:29953 Contributo in Atti di convegno (273)
G.F. SOLITRO; CAPPETTI N.; G. AMATO; A. NADDEO(2007). A CUSTOMIZABLE SPINAL COLUMN CAD MODEL. In: Proceedings of ICCB 2007 III International Congress on Computational Bioengineering Isla Margarita, Venezuela 17-19 September 2007 Caracas INABIO (Caracas, Venezuela) Vol.unico, Pag.91-96 ISBN:9789806939103
ID:18737 Contributo in Atti di convegno (273)
NADDEO A; CAPPETTI N.; NADDEO F; PAPPALARDO M(2007). CRANIOENCEPHALIC TRAUMA, IN HELMET PROTECTED HUMANS, MODELED USING CAD/FEM TECHNIQUES. INABIO (Caracas, Venezuela) 17-19 September 2007 Vol.unico, Pag.97-104 ISBN:9789806939103
ID:18738 Contributo in Atti di convegno (273)
NADDEO A.; SOLITRO G.F; CAPPETTI N; AMATO G(2007). A CUSTOMIZABLE SPINAL COLUMN CAD MODEL. In: Proceedings of ICCB 2007, III International Congress on Computational Bioengineering Isla de Margarita (Venezuela) 17-19 September 2007 CARACAS INABIO Vol.unico, Pag.91-96 ISBN:9789806939103
ID:18906 Contributo in Atti di convegno (273)
NADDEO A.(2007). A New Method for Measuring Solution Approximation using α-cut in Industrial Design Problems formulated by Axiomatic Framework and Para-Complete Logic. In: Proceedings of IPMM 2007 International Conference Salerno (ITALY) 25-29 June 2007 Vol.cd, Pag.cd-file
ID:18905 Contributo in Atti di convegno (273)
AMATO G; CAPPETTI N.; NADDEO A(2007). Active Models of Mechanisms in Assembly Environment. In: Dall'idea al Prodotto: la rappresentazione come base per lo sviluppo e l'innovazione Perugia 6-8 giugno 2007 PISA edizioni ETS Pag.505-512 ISBN:9788846718419
ID:18733 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M; PAPPALARDO M(2006). Software independence: impact on Product Development Plan in Automotive Industries. In: Proceedings of International Conference on Achievements in Materials and Manufacturing Engineering (proceedings on DVD, abstract on book) Gliwice - Wisla (Poland) 4-8 June 2006 WISLA L.A. Dobrzanski Vol.unico, Pag.431-434 ISBN:9788389728203
ID:13962 Contributo in Atti di convegno (273)
NADDEO A.; AMATO G; PAPPALARDO M(2006). MATERIAL'S BEHAVIOR MODELING METHOD BASED ON DEVELOPMENT OF "ACTIVE MODEL" FOR PHYSICS-BASED CAD. Salvador de Bahia, Brazil 06-10 Agosto 2006 SAN PAOLO San Paolo University Vol.unico, Pag.--- ISBN:9788586686399
ID:13961 Contributo in Atti di convegno (273)
NADDEO A.(2006). AXIOMATIC FRAMEWORK APPLIED TO INDUSTRIAL DESIGN PROBLEM FORMULATED BY PARA-COMPLETE LOGICS APPROACH: THE POWER OF DECOUPLING ON OPTIMIZATION-PROBLEM SOLVING. In: Proceedings of The Fourth International Conference on Axiomatic Design (proceedings on CD, Abstracts on book) Firenze June 13-16, 2006 FIRENZE UNIVERSITA' DI FIRENZE Vol.unico, Pag.17-17 ISBN:0000000000
ID:13960 Contributo in Atti di convegno (273)
NADDEO A.; PAPPALARDO MICHELE; CARMANDO REMIGIO; LISANTI ROBERTO(2005). CRASH ANALYSIS OF AUTOMOTIVE STRUCTURAL MEMBERS, UNDER BENDING LOADS DUE TO HIGH VELOCITY IMPACT, AND EVALUATION OF METAL FORMING PROCESS MEMORY ON CRASH BEHAVIOR. In: Proceedings of Congreso Internacional XVII INGEGRAF - XV ADM Sevilla (Spain) 1-3 Giugno 2005 Sevilla INGEGRAF Vol.unico, Pag.267-267 ISBN:9788492325337
ID:6038 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI N; NICOLINO F(2005). FUZZY INFERENTIAL SYSTEM FOR CORRECTION OF HOLE-DIAMETER MEASUREMENT USING A COORDINATE MEASURING MACHINE. In: Proceedings of Fifth IPMM Conference Monterey (CA), U.S.A. July 19 - 23, 2005, John Meech Vol.Unico, Pag.--- ISBN:0849314933
ID:6885 Contributo in Atti di convegno (273)
NADDEO A.; PAPPALARDO MICHELE(2005). Failure mode analysis using Axiomatic Design and Non-Probabilistic Information. In: Proceedings of 13th International Conference on Achievements on Mechanical and Materials Engineering Gliwice (Poland) 16th-19th May 2005 L.A. Dobrzansky Vol.unico, Pag.517-522 ISBN:8389728133
ID:6887 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI NICOLA; ANNARUMMA MARINA; AMATO GIUSEPPE(2005). STATE OF THE ART ON PEDESTRIAN SAFETY: SIMULATION AND DESIGN SOLUTION FOR AUTOMOTIVE INDUSTRIES. In: Proceedings of Congreso Internacional XVII INGEGRAF - XV ADM Sevilla (Spain) 1-3 Giugno 2005 Sevilla INGEGRAF Vol.unico, Pag.1-9 ISBN:9788492325337
ID:6037 Contributo in Atti di convegno (273)
NADDEO A.; PAPPALARDO M; MONACELLI G; MATTERA M(2005). NUMERICAL/EXPERIMENTAL CHARACTERIZATION OF COPOLYMERS WITH MINERAL CHARGE, FOR AUTOMOTIVE APPLICATION, to SIMULATe CRASH EVENTS. In: Proceedings of 2005 ATA International Conference Pomigliano d'Arco (NA) - Italy October 20-21, Vol.-, Pag.---
ID:6867 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI N; PAPPALARDO M(2005). USING ALFA-CUT FOR OPTIMIZATION OF DESIGNS FORMULATED BY AXIOMATIC THEORY AND PARA-COMPLETE LOGIC. In: Proceedings of IPMM CONFERENCE Monterey (CA), U.S.A. July 19 - 23, 2005 CRC Press Vol.Unico, Pag.--- ISBN:0849314933
ID:6886 Contributo in Atti di convegno (273)
NADDEO A.(2004). New Child/Adult Head impactor modelling for Pedestrian Test simulation, according to EEVC WG17 protocol - rel. 2002, using FEM explicit codes. In: Proceedings of XIV ADM - XXXIII AIAS 31/08 - 02/09 2004 - Bari (Italy) ADM - Associazione Disegno di Macchine Pag.409-409 ISBN:9788890063725
ID:6039 Contributo in Atti di convegno (273)
NADDEO A.(2004). Axiomatic design of a concept of car-platform for an electrical rear-wheel drive vehicle: a comparison with a fuzzy approach. In: Proceedings of ICAD 2004 International Conference on Axiomatic Design Seoul (Rep. of South Korea) 21-24 of June 2004 - Vol.-, Pag.---
ID:6868 Contributo in Atti di convegno (273)
NADDEO A.; CARMANDO R.; CAPPETTI N.; ANNARUMMA M.(2004). Upper Leg impactor modelling for Pedestrian Test simulation using F.E.M. explicit codes. In: 8TH WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL IX, PROCEEDINGS: COMPUTER SCIENCE AND ENGINEERING Orlando (FL - U.S.A.). 18-21 of July 2004 Orlando (FL) - USA Callaos, N; Kim, TH; Chen, JC; Fung, WK; Naddeo, A Vol.IX, Pag.104-109 ISBN:9806560132
ID:6040 Contributo in Atti di convegno (273)
NADDEO A.; CAPPETTI N; PAPPALARDO M(2004). Design decoupling method based on para-complete logics. In: Proceedings of ICAD 2004 Seoul (Rep. of South Korea) 21-24 of June 2004 Vol.-, Pag.---
ID:6869 Contributo in Atti di convegno (273)
ANNARUMMA M.; A. NADDEO; M. PAPPALARDO(2004). New child/adult head impactor modelling for pedestrian test simulation, according to EEVC WG17 protocol - rel. 2002, using fem explicit codes. Bari 31 Agosto - 2 Settembre 2004 Pag.-----
ID:10701 Contributo in Atti di convegno (273)
NADDEO A.; CARMANDO R.; CAPPETTI N.; PAPPALARDO M.(2004). Lower Leg impactor modelling for Pedestrian Test simulation using F.E.M. explicit codes. In: 8TH WORLD MULTI-CONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL IX, PROCEEDINGS: COMPUTER SCIENCE AND ENGINEERING Orlando (FL - U.S.A.) 18-21 of July 2004 Orlando, FL Callaos, N; Kim, TH; Chen, JC; Fung, WK; Naddeo, A Vol.IX, Pag.98-103 ISBN:9806560132
ID:6049 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A; CAPPETTI N; MONACELLI G; MASCIOCCO G(2003). Experimental characterization of Cellular Foam type CF-45 Blue and its modelling by the FEM explicit code PamCrash: a proposal to characterize foam with a compression test made with controlled strain-rate values. In: Intelligent Applications in a Material World: Selected Papers from IPMM-2003 Sendai – Japan 19-23 May 2003 Vancouver (CANADA) CRC Press Vol.1, Pag.--- ISBN:0849319285
ID:6879 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.; MONACELLI G.; PARRELLA A.(2003). Virtual and numerical simulation of under-bonnet elements influence on pedestrian head impacts. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.409-414 ISBN:9806560019
ID:6047 Contributo in Atti di convegno (273)
NADDEO A.; ANNARUMMA M.(2003). Virtual evaluation of energy exchange between two deformable body during low-energy impact. Application to the case of “Head on bonnet” impact according to WG17 and ACEA protocol. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.415-420 ISBN:9806560019
ID:6048 Contributo in Atti di convegno (273)
NADDEO A; PELLEGRINO A; PAPPALARDO M.(2003). Advances on Use of Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. settembre Vol.-, Pag.---
ID:6798 Contributo in Atti di convegno (273)
NADDEO A.; MONACELLI G. ET ALII(2003). L’esperienza di collaborazione di ricerca tra ELASIS e il Dipartimento di Ingegneria Meccanica (DIMEC) dell’Università degli Studi di Salerno: il Progetto Pedestrian Safety. In: Proceedings of ATA Workshop 2003 Trento – Italy 26-27 of June 2003 Vol.-, Pag.---
ID:6880 Contributo in Atti di convegno (273)
NADDEO A.; PELLEGRINO A.; PAPPALARDO M.(2003). Using Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. In: 7TH WORLD MULTICONFERENCE ON SYSTEMICS, CYBERNETICS AND INFORMATICS, VOL XIII, PROCEEDINGS: SYSTEMICS, CYBERNETICS AND INFORMATICS: TECHNOLOGIES AND APPLICATIONS Orlando (FL) - USA 27-31 July 2003 Orlando (FL) Callaos, N; Lesso, W; Crespo, J; Donnarumma, A; Fujii, S Vol.13, Pag.421-425 ISBN:9806560019
ID:6046 Contributo in Atti di convegno (273)
NADDEO A.(2003). A study on the influence of mass distribution on thin walled beam for vehicle use (made by tailored-welded-blanks) in crash performance at high and medium velocity. In: Proceedings of International Conference XIII ADM - XV INGEGRAF ’03 Cassino-Salerno-Napoli, Italy 03-06 June 2003 Vol.1, Pag.---
ID:6878 Contributo in Atti di convegno (273)
NADDEO A.; PELLEGRINO A.; PAPPALARDO M.(2003). Advance on use of Virtual Prototyping and Rapid Prototyping to evaluate, for industrial benchmarking, Pedestrian Safety performances of the front part of a vehicle. In: Proceedings of IMC-20 Irish Manufacturing Committe Cork, Ireland 2-5 of September 2003 Cork Institute of Technology Vol.1, Pag.230-237 ISBN:9780954573607
ID:6044 Contributo in Atti di convegno (273)
DONNARUMA A; PAPPALARDO M; CAPPETTI N; NADDEO A.; PELLEGRINO A(2003). I Grafi come modelli nell’analisi delle tensioni. In: Proceedings of International Conference XIII ADM - XV INGEGRAF ’03 Cassino-Salerno-Napoli, Italy 03-06 June 2003 Vol.1, Pag.---
ID:6877 Contributo in Atti di convegno (273)
NADDEO A.; MONACELLI G; PETRELLA V(2003). Lower leg impactor’s knee joint modellation for pedestrian test simulation using explicit codes. 03-06 June 2003 Vol.1, Pag.---
ID:6881 Contributo in Atti di convegno (273)
CAPPETTI N.; DONNARUMMA A.; NADDEO A.; RUSSO L.(2002). D.O.E. about foam CF45 for pedestrian safety in car design. In: Proceedings of AMME ’02 (Achievements in Mechanical & Materials Engineering) Zakopane – Poland 16-18 December 2002 OCSCO World Press Vol.1, Pag.31-38 ISBN:9788391445877
ID:6043 Contributo in Atti di convegno (273)
MONACELLI G; PETRELLA V; NADDEO A.; DONNARUMMA A; CAPPETTI N(2002). A study on structural behaviour of a car-bonnet during child-head impact, using parametric-variational cad/cae modelling techniques and numeric computation by explicit codes. In: Proceedings of XXXI AIAS Parma Italy 18-20 September 2002 Vol.1, Pag.---
ID:6883 Contributo in Atti di convegno (273)
ARMENTANI E; CAPUTO F; CITARELLA R; INFANTE M; LAVORGNA G; NADDEO A.(2002). Analisi fem di una mandibola umana con relativa articolazione temporo-mandibolare. In: Proceedings of XXXI AIAS Parma-Italy 18 – 21 settembre 2002 Vol.1, Pag.---
ID:6882 Contributo in Atti di convegno (273)
MONACELLI G; PETRELLA V; NADDEO A.(2002). New Methodologies to study in a Virtual Reality Centre the automotive behaviour during different Crash Tests. In: Proceedings of 8th HTCES - (HIGH-TECH CARS AND ENGINES) Modena (IT) 30-31 May 2002 Vol.1, Pag.---
ID:6884 Contributo in Atti di convegno (273)
NADDEO A.(2001). Application of Fuzzy logic in design phase of car-platform for an electrical rear-wheel drive vehicle. In: Proceedings of XII ADM Rimini (Italia) 5-7 September 2001 Vol.1, Pag.A4-20
ID:6042 Contributo in Atti di convegno (273)
DONNARUMMA A; PAPPALARDO M.; CAPPETTI N; NADDEO A(2001). Sensitivity analysis on results of fuzzy optimisation of a support plate for hybrid-propelled vehicle application. In: Proceedings of 7th International Conference ATA Florence Florence May 2005 Vol.-, Pag.---
ID:6805 Contributo in Atti di convegno (273)
NADDEO A.; DONNARUMMA A.; CAPPETTI N.; PAPPALARDO M.(2000). Fuzzy logic application in the structural optimisation of a support plate for electrical accumulator in motor vehicle. In: IMC-17 Proceedings Galway-Ireland 23-25 Aug 2000 GAlway (IR) National University of Galway Vol.1, Pag.147-156 ISBN:9780953897407
ID:6041 Contributo in Atti di convegno (273)